Mustang Factory

Classic Auto Air Perfect Fit Series Systems Home Page

Back                                   Home

INTRODUCTION
Shown Left: 1967-68 V-8 Mustang / Cougar
 

  Beat the Heat with Classic Auto Air's all new ultra high performance Perfect Fit Series systems. A robust, in-dash, heat/cool and defrost total climate control system that replaces the old  heater/defrost box. The factory heater panel controls the system. Designed specifically for each year, make and model. Stock dash vent locations on most applications for that sought after - but until now, rarely achieved - factory air appearance! Floor and dash (bi-level) A/C and heat with dehumidified defrost provide the driver with total airflow control and superior passenger comfort in all climates. Large separate heat and A/C coils are very important features exclusive to the Perfect Fit Series.
   Under the hood, Sanden's state-of-the-art compressor creates an attractive appearance and is also available polished. High performance engines and A/C are now a "perfect marriage". Sanden's high efficiency compressors require an insignificant amount of horsepower and have a 6,000 rpm continuous duty rating. High performance reproduction condensers installed in factory provided locations produce an ease of installation and higher resale values never before seen in the aftermarket A/C industry. Each system is supplied with very detailed, photo illustrated instructions. Uncompromised quality, component selection and attention to detail are why enthusiasts everywhere are proud to say "My Ride has Classic Air". Simply stated - No other system compares!
 
ABOUT THE PRODUCT

  Classic Auto Air's excellent reputation for uncompromised quality, component selection and attention to detail is evident in all aspects of the Perfect Fit Series product line! Every component was chosen based on it's superior design, durability and quality rather than a low cost.
 


  Engineered with large separate A/C and heat coils just like factory air (OEM) systems. Beware of small "Hot Rod" type systems with only one coil. When part of the cooling coil is used as a heater, total system performance is compromised and the heater tubes can freeze and burst. Flooded, ruined interiors are never a concern due to this exclusive Perfect Fit Series feature. Remember, smaller is never better when it comes to coil/case size!
 

 
  All mode doors are controlled by cables or electric servo motors. No complex maze of vacuum pots, solenoids, relays, wire and vacuum harnesses to understand and keep functioning.
   All mode doors and shafts are a high temperature, glass filled, nylon extrusion - just like OEM systems. This exclusive feature totally eliminates rusted out small diameter shafts and doors that plague the competition. Beware of "Throw-Away" type units that are totally glued shut requiring you to purchase the entire dash unit rather than a $10 part!
 

 
  Highest quality OEM control cables available. A stainless wire glides effortlessly within a nylon lined housing that never needs lubricating. Built in adjusters are an important and exclusive feature. Generic steel cables will rust and bind up. Also, without adjusters, cables are hard to service and can require dismantling the dash for periodic adjustments and lubrication.
   When cables are not a practical design choice, servo motors to drive air diverter doors are a simple and ideal solution. Classic Auto Air was first to introduce electronic servo motor drive technology!
 

 
  Latest, most advanced ultra high output OEM-style blower assembly from Spal. Exceptional air volume and service life with far less noise. Heat sink mounted 3 speed resistor provides dual thermal protection.
 
  For decades Classic Auto Air has specialized in 1950s - 1970s cars, most having large interior cabins. We know what it takes to keep you cool during the hottest summer months. Don't make an expensive mistake with a small, poorly made "Street Rod" type unit. Classic Auto Air's Perfect Fit Series is built to last a lifetime. These feature-rich OEM-style systems are computer designed for robust, maximum performance and a "Perfect Fit" every time!
 
FEATURES
  • Full 3 yr warranty for all 134a & R-12 systems
  • Designed for each specific year and model car
  • Smooth firewall for a clean look
  • In-dash or under dash A/C vent
  • Floor and dash heat with dehumidified defrost
  • Stock heater control panel utilized on most models
  • Designed to far outperform original and competitor systems
  • Compressor Hi/Low pressure safety switch kit included
  • Large, separate cooling & heating coils like OEM units
  • OEM style doors & shafts totally eliminate rust that plagues competitor units
  • Highest quality stainless steel OEM control cables with built-in adjusters or electronic servo motors
  • Latest, most advanced OEM style blower assembly from Spal
  • Easy to follow, very detailed photo illustrated instructions
  • No rubber A/C or heater hose on interior side of firewall on most models. Totally eliminates interior damage due to refrigerant oil and engine coolant hose rupture.